Makita Td111d: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Makita TD111D Information

the information about the Makita TD111D impact driver:

Introduction

The Makita TD111D is a 12V cordless impact driver that is perfect for a variety of light-duty tasks around the home and workshop. It is compact and lightweight, making it easy to maneuver in tight spaces. The TD111D also features a brushless motor that delivers high torque and speed for fast and efficient driving.

Full specifications

  • Voltage: 12V
  • Chuck size: 1/4"
  • Max torque: 135 Nm
  • Speed: 0-3,000 / 1,300 RPM
  • Impacts per minute: 0-3,900 / 1,600 IPM
  • Weight: 1.1 kg

Features

  • Brushless motor for high torque and speed
  • Compact and lightweight design
  • 3-mode operation: A-mode, Hard mode, and Soft mode
  • 2-speed power selection switch
  • LED job light
  • Ergonomic soft-grip handle
  • Individual cell monitoring with circuit protection

What's in the box

  • Makita TD111D impact driver
  • 1.5Ah Li-ion battery
  • Charger
  • Instruction manual

Additional information

The Makita TD111D is backed by a 3-year warranty. It is also part of the Makita CXT range of compact and powerful cordless tools.

Here is a table of the TD111D's specifications:

FeatureSpecification
Voltage12V
Chuck size1/4"
Max torque135 Nm
Speed0-3,000 / 1,300 RPM
Impacts per minute0-3,900 / 1,600 IPM
Weight1.1 kg

The TD111D is a great choice for a variety of light-duty tasks, such as:

  • Driving screws into wood and plastic
  • Fastening bolts
  • Removing screws and bolts
  • Working in tight spaces

If you are looking for a compact, lightweight, and powerful impact driver for light-duty tasks, then the Makita TD111D is a great option.

Makita TD111D Compare with Similar Item

a table comparing the Makita TD111D with similar items:

FeatureMakita TD111DMakita TD110DMilwaukee M28 FID
Voltage12V12V12V
Max torque140Nm135Nm135Nm
Impacts per minute0-3,6000-3,0000-3,600
Chuck type¼" hex¼" hex¼" hex
Weight1.3kg1.4kg1.3kg
Price\$100\$90\$110

As you can see, the Makita TD111D is very similar to the Makita TD110D. The main difference is that the TD111D is brushless, which means it is more efficient and has a longer lifespan. The Milwaukee M28 FID is also a brushless impact driver, but it is slightly more powerful and has a faster speed. However, it is also more expensive.

Overall, the Makita TD111D is a great choice for a 12V impact driver. It is powerful, efficient, and reasonably priced. If you are looking for the absolute best performance, you may want to consider the Milwaukee M28 FID. However, if you are on a budget, the Makita TD111D is a great option.

Here are some additional things to consider when choosing an impact driver:

  • Power: The amount of torque an impact driver has will determine how easily it can drive screws and bolts. If you will be using the impact driver for heavy-duty tasks, you will need one with a lot of torque.
  • Speed: The speed of an impact driver will determine how quickly it can drive screws and bolts. If you are working on a project that requires you to drive a lot of screws, you will want an impact driver with a fast speed.
  • Weight: Impact drivers can be heavy, so if you will be using it for extended periods of time, you will want to choose one that is lightweight.
  • Price: Impact drivers can range in price from \$50 to \$200. It is important to set a budget before you start shopping so that you do not overspend.

I hope this helps!

Makita TD111D Where To Buy

Here are some places where you can buy Makita TD111D and spare parts:

  • Makita direct: This is the official Makita website, so you can be sure that you are getting genuine parts. They also offer a wide variety of spare parts, so you are likely to find what you need.
  • Walmart: Walmart is a major retailer that carries a wide variety of power tools, including Makita TD111D. They also offer competitive prices on spare parts.
  • Amazon: Amazon is another major retailer that carries a wide variety of power tools and spare parts. They often have lower prices than other retailers, but you may need to be careful to make sure that you are getting genuine parts.
  • Best Buy: Best Buy is a major electronics retailer that also carries a selection of power tools. They offer a variety of Makita TD111D models and spare parts.
  • Lowes: Lowes is a major home improvement retailer that carries a wide variety of power tools, including Makita TD111D. They also offer competitive prices on spare parts.
  • eBay: eBay is an online auction site where you can find a variety of Makita TD111D tools and spare parts. You may be able to find some great deals on eBay, but you need to be careful to make sure that you are getting genuine parts from a reputable seller.

Here are some additional tips for buying Makita TD111D and spare parts:

  • Check the warranty: Make sure that the tool or spare part you are buying comes with a warranty. This will protect you in case the tool or part malfunctions.
  • Read the reviews: Before you buy anything, read the reviews to see what other people have said about it. This can help you to avoid buying a product that is not well-made or that does not work as advertised.
  • Compare prices: Shop around to compare prices before you buy anything. You may be able to find a better deal by shopping at a different retailer.
  • Buy from a reputable retailer: Make sure that you are buying from a reputable retailer. This will help to ensure that you are getting genuine parts and that you are protected by the retailer's warranty.

Makita TD111D Problems and Solutions

some common issues and problems with the Makita TD111D impact driver, along with expert-approved solutions:

  • The LED light is not working.
    • Check the battery. Make sure that the battery is charged and properly inserted into the impact driver.
    • Replace the LED bulb. If the battery is working properly and the LED light is still not working, the bulb may be dead. You can follow the Makita TD111D LED Light Replacement guide to change it.
  • The impact driver is not driving screws.
    • Make sure that the bit is properly inserted into the chuck. The bit should be seated all the way down and should not be loose.
    • Check the clutch setting. The clutch setting may be too low. Try increasing the setting to see if the impact driver can drive the screws.
    • Clean the chuck. If the chuck is dirty or clogged with debris, it may not be able to grip the bit properly. Use a clean cloth to wipe down the chuck and remove any dirt or debris.
  • The impact driver is making a strange noise.
    • Check the bit. Make sure that the bit is the correct size and type for the screws you are using.
    • Check the chuck. Make sure that the chuck is properly tightened and that the bit is seated all the way down.
    • Inspect the impact driver. If you hear a strange noise coming from the impact driver itself, it may need to be serviced by a qualified technician.

Here are some additional tips for troubleshooting common problems with the Makita TD111D impact driver:

  • Read the owner's manual. The owner's manual contains a wealth of information about the impact driver, including troubleshooting tips.
  • Contact Makita customer support. If you are unable to troubleshoot the problem yourself, you can contact Makita customer support for assistance.

I hope this helps!

Makita TD111D Manual

Makita TD111D Cordless Impact Driver

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this tool out of the reach of children.
  • Do not use this tool if it is damaged.
  • Wear safety glasses and hearing protection when using this tool.
  • Use the correct size bit for the job.
  • Do not overload the tool.
  • Keep the tool clean and free of debris.
  • Store the tool in a dry place.

Before Use

  • Make sure the battery is properly inserted into the tool.
  • Choose the correct speed setting for the job.
  • Use a bit that is the correct size for the screw or fastener you are using.
  • Hold the tool firmly with both hands.
  • Apply pressure to the screw or fastener as you drive it in.
  • Do not force the tool.
  • If the tool starts to bind, back it out and try again.

Troubleshooting

  • If the tool does not work, check the battery charge.
  • If the battery is charged, check the fuse.
  • If the fuse is good, the tool may need to be repaired.

Maintenance

  • Clean the tool with a mild soap and water solution.
  • Do not use harsh chemicals or solvents to clean the tool.
  • Allow the tool to dry completely before storing it.
  • Store the tool in a dry place.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of 3 years from the date of purchase. If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this tool or to contact Makita for warranty service, please visit the Makita website at www.makita.com or call 1-800-4-MAKITA (1-800-462-5482).

Additional Information

  • The Makita TD111D cordless impact driver is a powerful and versatile tool that can be used for a variety of applications, including driving screws, bolts, and nails.
  • The tool features a brushless motor that provides long-lasting performance and a variable speed trigger that allows you to control the driving speed.
  • The tool also includes a LED work light that helps to illuminate the work area.
  • The Makita TD111D is backed by a 3-year warranty.

Here are some additional tips for using the Makita TD111D cordless impact driver:

  • Always wear safety glasses and hearing protection when using the tool.
  • Use the correct size bit for the job.
  • Do not overload the tool.
  • Keep the tool clean and free of debris.
  • Store the tool in a dry place.

If you have any questions about using the Makita TD111D cordless impact driver, please consult the owner's manual.

Comments

Post a Comment

Popular posts from this blog

Gardena Easycut Li-18/50: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Gardena EasyCut Li-18/50 Information the information about the Gardena EasyCut Li-18/50 hedge trimmer: Introduction The Gardena EasyCut Li-18/50 is a lightweight and cordless hedge trimmer that is perfect for trimming small hedges and shrubs. It is powered by a 18 V lithium-ion battery, which provides up to 60 minutes of runtime. The trimmer has a powerful motor that delivers a clean and efficient cut, and the two-sided cutting blade is easy to adjust for different trimming needs. The EasyCut Li-18/50 is also equipped with an ergonomic handle that helps to reduce fatigue during use.
Read more

Hilti Dd-cs-bs Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Hilti DD-CS-BS Information The Hilti DD-CS-BS is a universal chuck for diamond coring machines. It is designed to accept a wide range of core bits, from 32 to 75 mm in diameter. The chuck is made of high-quality steel and features a hardened steel sleeve that protects the core bits from wear and tear. The chuck also has a quick-release mechanism that makes it easy to change core bits. Specifications
Read more

The Complete Guide To Husqvarna 450e Ii: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Husqvarna 450e II Information The Husqvarna 450e II is a cordless chainsaw that is perfect for homeowners and professionals alike. It is powered by a 450Wh battery that provides up to 45 minutes of runtime, and it has a cutting bar length of 16 inches. The chainsaw is also equipped with a number of features that make it easy to use and safe, including a soft start trigger, a chain brake, and an anti-vibration system. Image
Read more